Bathroom Mirror 140x60 cm LED with Anti-Fog and WiFi Station

→ Modern design: Fits perfectly into contemporary bathrooms.
→ Material: AGC MIROX mirror glass, providing a clear and lasting reflection.
→ Lighting: 12V LED 2835 with 120 pcs/mb, for uniform and bright lighting.
→ Thickness of the mirror glass: 4 mm, guaranteeing robustness and quality of reflection.
→ Distance from the wall: 25 mm, for an elegant and discreet installation.
→ Power supply: Operates on 230V, with integrated transformer for safety.
→ Power cable: 5m of cable to allow power supply even at remote points. Supplied with its plug for a classic connection to a power outlet.
→ Protection rating (IP67): The 12V power supply is integrated and hidden behind the glass, ensuring optimal sealing.
→ Component certificates: Compliant with CE, IP44, CTC, ROHS standards for maximum reliability and safety.
→ Edge finishing: Trapezoidal grinding and polishing, providing an elegant and secure finish.
→ Manufacturer's warranty: 2 years, for guaranteed peace of mind.

→ Fixing Instructions for the 140x60 cm Mirror
→ Follow these instructions carefully to securely mount your mirror to a plasterboard or solid wall. Make sure you have all the necessary tools before starting installation.

→ Tools needed:
→ Drill with bit suitable for the material of your wall (placo or concrete)
→ Spirit level for precise alignment
→ Tape measure for measurements
→ Suitable anchors (expansion anchors for placo or concrete anchors)
→ Round head screws
→ Screwdriver or electric screwdriver
→ Hammer
→ Pencil to mark the drilling points

Fixing Steps:

1. Preparation:
→ Choose the location of your mirror and make sure the surface is clean and smooth.
→ Use the spirit level to check the horizontality of your future mirror.
→ Mark the fixing points on the wall with a pencil, following the pre-drilled holes located on the back of the mirror.

2. Drilling and Installing the Anchors:
→ For a placo wall:
→ Use a drill bit with a diameter suitable for expansion anchors. Drill the holes at the marked locations. Insert the expansion anchors by gently tapping them with a hammer.
→ For a concrete wall:
→ Use a drill bit with a diameter suitable for concrete anchors. Drill the holes at the marked locations. Insert the concrete anchors by gently tapping them with a hammer.

3. Fixing the Mirror:
→ Screw the round-head screws into the dowels, leaving the head slightly protruding to hang the mirror.
→ Lift the mirror and place it on the screws, adjusting the position so that it is securely fixed and stable.
→ Use the spirit level to check that the mirror is straight. Adjust if necessary by slightly repositioning the screws.

→ Safety Tips:
→ Make sure the screws and anchors are properly secured before releasing the mirror.
→ For placo walls, it is recommended to use expansion anchors for better hold.
→ Never attempt to fix a mirror without using suitable wall plugs, especially on placo walls.
→ Ask for help if the mirror is too heavy to lift alone.

→ By following these steps, you will be able to fix your mirror securely, whether it is on a placo partition or a solid wall, for a stable and elegant result.

→ Electrical Connection Instructions for the 140x60 cm Mirror with Shelf
→ There are three different ways to connect your mirror, depending on your electrical installation and preferences. Here are the instructions for each method, as well as a list of the tools needed for a secure connection.

→ Tools needed:
→ Suitable drill and bits
→ Flat and Phillips screwdrivers
→ Cable detector (recommended)
→ Flush-mounted box (if passing behind a partition)
→ Cutting pliers and wire stripper
→ Electrical conduit (if necessary)
→ Insulating tape
→ Pencil and level

→ Option 1: Direct connection to the mains socket
→ The mirror is equipped with a 5 meter cable and a mains plug for quick and easy installation.
→ Place the mirror near the existing power outlet.
→ Simply plug the plug into the mains socket. Make sure the socket is compatible with European standards (230V).
→ Ensure the cable is correctly positioned to avoid any risk of tripping.
→ Your mirror is ready to use. Turn on the light functions using the touch switch.

→ Option 2: Passage behind a partition
→ For discreet installation, the cable can be run behind a partition.
→ Determine the location of the cable passage behind the partition using the pencil and level.
→ Drill a hole in the partition, taking care not to touch existing electrical cables (use a cable detector for added safety).
→ Insert the mirror cable into the hole, then bring it out at the location of the socket or junction box.
→ Plug the cable into the socket provided for this purpose.
→ Replace the mirror against the partition and check that everything is aligned.

→ Option 3: Making a cut in the wall
→ For an even cleaner look, the cable can be hidden in a groove made in the wall.
→ Mark the path of the kerf with a pencil, using a level to ensure a straight path.
→ Using a groover or grinder, make the groove along the line.
→ Insert the mirror cable into an electrical conduit for safety, then place the conduit in the groove.
→ Connect the cable to a socket or flush-mounted box.
→ Fill the groove with plaster and let it dry before putting the mirror back in place.
→ Your installation is now ready for daily use.

→ Safety instructions:
→ To ensure a secure installation:
→ Make sure to turn off the power supply before any intervention.
→ If you are not comfortable with electrical connections, call a professional electrician.
→ Comply with current electrical standards to avoid any risk of short circuits.

→ Enjoy your new 140x60 cm mirror with shelf for optimal comfort in your bathroom.