100x80 LED Bathroom Mirror – Integrated Anti-Fog & Premium Design

→ Dimensions: 100x80 cm (length x height)
→ Material: AGC MIROX mirror glass for a pure reflection
→ Glass and housing thickness: 40 mm
→ LED lighting: 12V LED 2835, 120 pcs/mb, adjustable temperature (2400K, 4000K, 7000K)
→ Anti-fog: yes, with touch activation
→ Distance from the wall: 5 mm thanks to the premium laminated casing
→ Certifications: CE, IP44, CTC, ROHS for safe use
→ Manufacturer's warranty: 2 years

→ Securely mounting your 100x80 cm rectangular mirror is essential to ensure its stability and durability. Follow the instructions below for successful installation, depending on the type of support (placo partition or solid wall). Each method requires specific tools for optimal mounting.

→ Fixing on plasterboard-style partition
→ Fixing to a placo partition requires the use of suitable anchors for a solid installation.
→ Tools required: drill with bits for placo, Molly anchors (or expansion anchors) suitable for the load of the mirror, screwdriver or screwdriver, tape measure, spirit level, hammer (if necessary to drive in the anchors).
→ Measure the location of the fixing points on the back of the mirror and transfer them to the wall using the tape measure.
→ Use the spirit level to ensure perfect alignment of your mirror.
→ Drill the holes at the marked locations using a drill fitted with a bit suitable for placo.
→ Insert the Molly plugs into the holes and use a hammer if necessary to drive them in properly.
→ Tighten the dowels with a screwdriver to securely fix them to the partition.
→ Screw the hook screws into the dowels, then hang the mirror on the hooks.

→ Fixing to a hard wall
→ For fixing to a solid wall (concrete, brick, breeze block), use suitable anchors to ensure a robust fixing.
→ Tools required: hammer drill with concrete drill bits, wall plugs suitable for hard walls (concrete, brick, concrete block), screwdriver or screwdriver, tape measure, spirit level, hammer.
→ Measure the location of the fixing points on the back of the mirror and transfer them to the wall using the tape measure.
→ Use the spirit level to check horizontal and vertical alignment.
→ Drill the holes at the marked locations with a hammer drill equipped with a concrete drill bit.
→ Insert the concrete anchors into the drilled holes and tap them lightly with a hammer.
→ Screw the hook screws into the dowels to ensure a solid fixing.
→ Hang the mirror on the hooks, checking that it is stable.

→ For any additional questions or assistance during installation, please contact our customer service. We wish you a successful installation and enjoyable use of your new Miroir France mirror!

→ Electrical Connection Instructions

→ There are several connection options available for installing your 100x80 cm rectangular mirror. Carefully follow the instructions below to ensure a safe and compliant installation. Each method requires specific tools, detailed for each option.

→ Connection with bleeding and sheath
→ Integrate the cable into the wall for a clean and discreet finish.
→ Tools required: router or chisel and hammer, drill with suitable bits, protective sheath for cable, spatula and filler, screwdriver for connection.
→ Use the 5 meter cable supplied with your mirror.
→ Mark the location of the groove on the wall for the passage of the duct.
→ Using a groover or a chisel and hammer, make a groove of the desired depth.
→ Insert the cable into a protective sheath for added safety.
→ Place the sheath in the groove, then cover it with filler.
→ Connect the cable to your existing electrical installation, in compliance with current standards.

→ Passing the cable behind a partition and connecting it to a junction box
→ Discreet option for invisible installation.
→ Tools required: drill with suitable bits, hole saw for cable routing, junction box, screwdriver and wire stripper, sheath for cable routing.
→ Drill a hole in the partition to pass the 5 meter cable behind it.
→ Insert the cable into a protective sleeve to secure it.
→ Bring the cable out to the desired location and plug it into a junction box to connect it to your electrical network.
→ Close the junction box and ensure the connection is secure.

→ Direct connection with visible cable and electrical outlet
→ The easiest method for quick installation.
→ Tools required: cutting pliers, wire stripper, screwdriver.
→ Use the 5 meter cable supplied with your mirror and connect it to an electrical outlet.
→ If the cable length is too long, cut the cable to the length you need.
→ Strip the wires with a wire stripper. Reconnect the plug to its cable.
→ Simply plug the plug into a standard electrical outlet.

→ For any additional questions or assistance during installation, please contact our customer service. We wish you a successful installation and enjoyable use of your new Miroir France mirror!