2m x 1m LED Bathroom Mirror

→ Material: Made of 4mm thick AGC MIROX glass, this mirror guarantees ultra-clear reflection and robustness ideal for everyday use.

→ 12V LED Lighting: Featuring 2835 LED technology with 120 LEDs per meter, it provides soft, energy-efficient lighting. The 230V IP44 power supply is discreetly integrated behind the glass for a sleek design.

→ Installation and Safety: Designed for wall mounting with a distance of 25 mm from the wall, this LED mirror ensures a solid and secure installation.

→ Certifications: Made of CE, IP44, CTC and RoHS certified materials, it meets the strictest safety and durability standards.

→ 2-year manufacturer's warranty: This mirror is backed by a 2-year manufacturer's warranty for maximum peace of mind.

→ Accessories: Comes with a 5m power cable and electrical plug for immediate installation.

→ Fixing to a placo partition

To fix the mirror to a placo partition, it is essential to use suitable dowels for a good hold.

Tools needed:
→ Drill with bit suitable for placo
→ Special anchors for placo (Molly anchors or expansion anchors)
→ Screwdriver
→ Spirit level (to ensure the mirror is straight)
→ Tape measure
→ Marking pencil

Instructions :

Measure and mark the location of the fixing points on the wall using the pencil and tape measure.
Drill the holes at the marked locations using a drill bit suitable for placo.
Insert the Molly or expansion anchors into the drilled holes.
Fix the screws into the wall plugs and leave them slightly protruding to hang the mirror.
Hang the mirror, making sure it is securely in place and check its level with the spirit level.
→ Fixing to a Hard Wall

For a solid wall (concrete, brick or breeze block), it is necessary to use suitable anchors for a solid fixing.

Tools needed:
→ Drill with bit suitable for concrete or brick
→ Universal anchors or anchors for concrete
→ Screwdriver
→ Spirit level
→ Tape measure
→ Marking pencil
→ Hammer (if needed to drive in the dowels)

Instructions :

Measure and mark the location of the fixing points on the wall using the pencil and tape measure.
Drill the holes at the marked locations using a drill bit suitable for concrete or brick.
Insert the dowels into the holes. Use a hammer if necessary to drive them in firmly.
Screw the screws into the wall plugs and leave them slightly protruding to hang the mirror on.
Hang the mirror and make sure it is level with the spirit level.
Note :
Make sure you follow the maximum weight recommendations for the type of wall and the anchors used. If in doubt, consult a professional.

LED Mirror Electrical Connection Instructions

This LED mirror can be installed in three different ways depending on your needs and space constraints. Please follow the instructions and use the appropriate tools for each installation method.

→ 1. Direct connection with its 5m cable and electrical plug provided

This method is the easiest and fastest. Simply plug the mirror into a standard wall outlet.

Tools needed:
→ Screwdriver (if fixing screws are needed to stabilize the mirror)
→ Drill (to fix the mirror to the wall if necessary)
→ Voltage detector (to check for the absence of current at the socket)

Instructions :
Simply plug the 5m cable's electrical plug into a nearby outlet. Make sure the outlet is easily accessible.

→ 2. Connection behind a Partition and Connection to a Junction Box

This method is ideal for an aesthetically pleasing look without visible cables. The cable is routed behind a partition and connected to a junction box.

Tools needed:
→ Hole saw or drywall saw (to cut a hole in the wall)
→ Cable and pipe detector (to avoid damage to existing installations)
→ Junction box
→ Screwdriver and screws to fix the junction box
→ Wire connectors
→ Drill and dowels (if necessary to fix the mirror)

Instructions :
Create an opening in the wall for the cable to pass through. Connect the cable to a junction box, then secure the mirror to the wall.