Bathroom Mirror 180x80 Full Options - Elegance and Advanced Technology

→ Dimensions: 180 cm x 80 cm
→ Lighting: 12V LED with touch dimmer (7000K - Cold light, 4000K - Neutral light, 2400K - Warm light)
→ LED power: 2835 LEDs, 120 pcs/meter
→ Energy consumption: Low energy consumption, class A++
→ Material: AGC MIROX 4 mm mirror glass with ground and polished edges
→ Distance to wall: 25 mm
→ Additional features: 5x magnifying mirror, Anti-fog by heating mat, P4 Wi-Fi weather station with time display, integrated Bluetooth
→ Protection index: IP44 (Protection against humidity and water splashes)
→ Certifications: CE, IP44, CTC, ROHS
→ Power supply: 230V with integrated 12V IP67 power supply
→ Warranty: 2 years

→ Mirror Fixing Instructions
→ To ensure a secure and stable installation of your mirror, carefully follow the instructions below depending on the type of wall (partition or solid wall). Make sure you have the necessary tools before starting.

→Required Tools
→Electric drill with suitable bit
→Screwdriver (Phillips or flat depending on the screws)
→Tape measure
→Spirit level
→Pencil to mark the landmarks
→Dowels adapted to your type of wall (placo or hard wall)
→Screws adapted to the size and weight of the mirror
→Adjustable wrench (if necessary)

Fixing to a Placoplâtre partition
If you are fixing your mirror to a Placoplâtre partition, it is essential to use specific anchors to ensure a secure fixing, particularly due to the weight of the mirror.
→Step 1: Measure and mark the locations of the mirror mounting points on the wall using a tape measure and spirit level to ensure the mirror is straight.
→Step 2: Use a drill with a suitable bit to drill the holes at the marked locations.
→Step 3: Insert special Placoplâtre anchors (e.g. Molly anchors or expansion anchors) into the holes.
→Step 4: Then screw the hooks or mounting brackets directly into the anchors using a screwdriver. Make sure they are securely fastened.
→Step 5: Hang the mirror by placing the hooks on the back of the mirror on the brackets you just attached.

Tip: Check the stability of the mirror after installation to ensure it is securely attached to the wall.

→ Fixing to a solid wall (brick, concrete, concrete block)
→ To fix your mirror to a solid wall, follow the steps below using wall plugs suitable for solid materials.
→ Step 1: Measure and mark the locations of the fixing points on the wall, checking with a spirit level to ensure perfect alignment.
→ Step 2: Use a drill with a bit suitable for concrete, brick or cinder block to drill the holes at the marked locations.
→ Step 3: Insert solid wall anchors (e.g. universal anchors or hammer anchors) into the drilled holes.
→ Step 4: Secure the mounting brackets with screws suitable for the weight of the mirror and the size of the anchors using a screwdriver or adjustable wrench.
→ Step 5: Hang the mirror by placing the hooks on the back of the mirror on the brackets attached to the wall.
→ Tip: After installation, check the attachment by pulling lightly on the mirror to ensure it is securely anchored to the wall.

→ Fixing with Reinforcement for Heavy Mirrors
→ For particularly heavy or bulky mirrors, it is recommended to reinforce the fixing with additional anchor points.

Step 1: Follow the same steps as for fixing to Placoplâtre or solid walls, adding additional wall plugs and screws if necessary to better distribute the weight of the mirror.

Step 2: You can also add a mounting rail to distribute the weight over a larger area of ​​the wall.

→ Tip: If you have any doubts about how to fix your mirror, do not hesitate to call a professional to ensure a safe and compliant installation.

Installation instructions for your 180x80 Bathroom Mirror
→ To properly install your LED-lit mirror, several electrical connection methods are available depending on your preferences and the layout of your room. Here are the detailed steps for each method:

→ 1. Direct connection to electrical outlet
→ This method is the simplest and does not require any specific development work.
→ → Step 1: Use the 5-meter cable supplied with the mirror. This cable is already equipped with an electrical plug.
→ → Step 2: Plug the electrical plug directly into a standard wall outlet in your bathroom or other room.
→ → Step 3: Make sure the outlet is functional and properly connected to your electrical circuit.
→ → Tip: Use a cable cover if you want to hide the wire for a more aesthetic installation.

→ 2. Passage Behind a Partition and Connection to a Junction Box
→ If you prefer a more discreet installation, here are the steps to hide the cable and connect it to a junction box behind a partition:
→ → Step 1: Pass the supplied cable through an electrical conduit to run it behind the partition or in a hollow wall.
→ → Step 2: Access a junction box installed inside the wall or an adjacent partition.
→ → Step 3: Connect the cable to the junction box, respecting the wire color code (neutral, phase, ground) to ensure a secure connection.
→ → Step 4: Close the junction box and make sure all cables are securely fastened.

→ 3. Bleeding in the Wall and Direct Connection
→ For a fully recessed installation, you can opt to create a groove in the wall and completely hide the cable.
→ → Step 1: Make a groove in the wall where you want to run the cable. Use suitable masonry tools to dig a groove wide enough to accommodate an electrical conduit.
→ → Step 2: Pass the mirror cable through a conduit and insert this conduit into the groove made in the wall.
→ → Step 3: Connect the cable to a flush-mounted junction box or directly to your electrical network via a suitable circuit breaker.
→ → Step 4: Fill the groove with plaster or finishing coat and repaint to obtain an invisible result.
→ → Tip: This method is ideal for a clean and discreet installation, but it requires professional intervention to ensure electrical compliance and a flawless finish.

→ Important: Whatever connection method you choose, always make sure you turn off the power supply before working on the installation and, if necessary, call a qualified electrician for a compliant and safe installation.